Echo PPT-280 Manuale Utente Scaricare il pdf (Pagina 14)

WARNING

Saw Chain is sharp! Always wear gloves when handling assembly,

otherwise serious personal injury may result.

1. Loosen the two (2) screws (C) and remove locator screw (D) on

cutting attachment.

2. Loosen clamp knob (E) turning counter clockwise.

3. Pull upper tube (F) out of berglass lower tube 127-152 mm (5-6

in.), then slide (F) back into berglass lower tube exposing inner

drive shaft (G). Align and join star shaped drive end of inner drive

shaft (G) with cutting attachment shaft (H).

4. Align ridges (J) on upper tube with seams in cutting attachment.

5. Slide together, aligning locator hole (D) in cutting attachment with

locating hole (I) in upper tube.

6. Install and tighten locator screw (D). Tighten two (2) cutting at-

tachment screws (C).

7. Extend upper tube to desired length. Tighten clamp knob (E) turn-

ing clockwise.

CuTTIng aTTaChmenT To drIve shafT InsTallaTIon

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Nessun commento

Echo PPT-280 Manuale Utente Pagina 14