Echo EDR-210 Manuale Utente

OPERATOR’S MANUALENGINE DRILLEDR-210X750-004 57 6X750409-3506 WARNINGREAD INSTRUCTIONS CAREFULLY AND FOLLOW RULES FORSAFE OPERATION.FAILURE TO DO SO

8HANDLING FUELMIXING INSTRUCTIONS -1. Fill an approved fuel container with half of therequired amount of gasoline.2. Add the proper amount of two-stro

9Choke leverSTART(Close) (Open)RUNAir cleanerFuel return linePurge bulbStarter handlePushONSTOPThrottle triggerThrottle trigger lockoutIgnition switch

10Shift leverClockwise(CW)Counterclockwise(CCW)REVERSE ROTATION• This model is equipped with reverse rotationmechanism.• When drilling, set shift leve

11MAINTENANCE AND CAREIMPORTANTTime intervals are maximum. Actual use andyour experience will determine the frequencyof required maintenance.Record da

12TROUBLE SHOOTINGTroubleEngine - hard to start Cause Remedy- does not startEngine Fuel at No fuel • Fuel filter clogged • Clean or replacecranks carb

13Fuel filterFuel tank capAir filterAir cleaner cover 0.6 - 0.7 mm (0.024 - 0.028 in)MAINTENANCEAIR FILTER• Clean before use.- Remove air cleaner cove

14Hexagonal bar(Part Number 895412-20960)Spanner (19 mm)Box spanner(10 mm)ADJUSTING CARBURETOR(As Required)GENERAL INFORMATIONThe idle speed adjuster

15CLEANING CYLINDER FINS(Check Periodically)NOTEClogged fins will cause poor engine cooling.1. Carefully remove housing and clean dirt anddust from fi

16SPECIFICATIONSEDR-210Mass without drill bit kg 4.6 (10.1 lb)Volumefuel tank L 0.5 (16.9 US fl. oz.)Drillsize mm 32 - 178 (1.25 - 7 inch)chuck capaci

17WARRANTY STATEMENTSECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010ECHO'S RESPONSIBILITYECHO Incorporate

WARNING Some dust created by power sanding, sawing, grinding, drilling, andother construction activities contains chemicals known to the Stat

18PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIESGD\UHVLGHQWLDORUQRQLQFRPHSURGXFLQJZDUUDQW\GD\FRPPHUFLDOLQVWLWXWLRQDODJUL

1 WARNINGIMPROPER USE OR CARE OF THIS UNIT, ORFAILURE TO WEAR PROPER PROTECTIONCAN RESULT IN SERIOUS INJURY.READ AND UNDERSTAND THE RULES FORSAFE OP

2 WARNINGALWAYS STOP THE ENGINE WHEN A DRILLJAM OCCURS. DO NOT ATTEMPT TOREMOVE AN OBJECT CAUSING A DRILLJAM IF THE ENGINE IS RUNNING. PHYSICALINJUR

3• Wear non-slip, heavy-duty work gloves toimprove your grip on the engine drill handles.The gloves also help reduce the transmissionof machine vibrat

4Repetitive Stress InjuriesIt is believed that over-using the muscles andtendons of the fingers, hands, arms and shouldersmay cause soreness, swelling

5 WARNINGBEFORE DRILLING, BE SURE TO READ ANDUNDERSTAND THE ENTIRE OPERATOR’SMANUAL TO AVOID THE CHANCE OFSERIOUS INJURY.• Do not force the drills a

6DESCRIPTION1. Operator’s manual - Included with unit. Readbefore operation and keep for future referenceto learn proper, safe operating techniques.2.

7ASSEMBLING• Insert the front handle to the machine, and turnclockwise.(TIGHTEN THE SCREW FIRMLY)- To operate front handle with right hand,remove righ